Categories
Network

Configure IPSEC VPN in netscreen Firewall

In this post, we will describe how to configure Ipsec VPN (Client-to-Site) in netscreen device.

The device version is 6.3.x.

The remote user will connect to the internal network 192.168.24.0/24

Categories
Network

Configure SNMP in Juniper Firewall

In this post, we will describe how to configure snmp in Juniper firewall

We need to create the community. It will be named : FW-Comm

Enter configuration mode, then type:

Set snmp community FW-Comm authorization read-only

After defining the community we need to define the clients IP:

Set snmp community FW-Comm clients 192.168.1.100/32

Categories
Network

Configure SNMP in Netscreen Firewall

In this post, we will describe how to configure snmp in Netscreen Firewall by web interface or CLI

  1. For configuring snmp in screenos by web interface :

we should be connected with RW account.

Navigate to Configuration →Report Setting →SNMP

[blockquote align=”none” author=””]Configure Listen Port and trap port (by default listen port is 161 and trap port is 162).[/blockquote]

[blockquote align=”none” author=””]and the apply.

Now we need to configure the community.

Click new community

[/blockquote]

[blockquote align=”none” author=””]Set the community name, choose the snmp version, the server address and the trap version. Then click add.[/blockquote]

2-For configuring snmp by CLI:

set snmp community “FW-Comm” Read-Write Trap-on traffic version v2c

set snmp host “FW-Comm” 192.168.1.100/32 trap v2

set snmp port listen 161

set snmp port trap 162