In this post, we will describe how to configure snmp in Juniper firewall
We need to create the community. It will be named : FW-Comm
Enter configuration mode, then type:
Set snmp community FW-Comm authorization read-only
After defining the community we need to define the clients IP:
Set snmp community FW-Comm clients 192.168.1.100/32
In this post, we will describe how to configure snmp in Netscreen Firewall by web interface or CLI
we should be connected with RW account.
Navigate to Configuration →Report Setting →SNMP
[blockquote align=”none” author=””]Configure Listen Port and trap port (by default listen port is 161 and trap port is 162).[/blockquote]
[blockquote align=”none” author=””]and the apply.
Now we need to configure the community.
Click new community
[/blockquote]
[blockquote align=”none” author=””]Set the community name, choose the snmp version, the server address and the trap version. Then click add.[/blockquote]
2-For configuring snmp by CLI:
set snmp community “FW-Comm” Read-Write Trap-on traffic version v2c
set snmp host “FW-Comm” 192.168.1.100/32 trap v2
set snmp port listen 161
set snmp port trap 162